PFP Products
Water-base Acrylic In-tumescent Sealant :UL 1479/ FM 4990 Classified, Used for fire sealing. Firestop rated up to 3hrs , 10 mm thickness applied, Adheres to concrete, stone,plasters, metal,, glass and plastic.
Water-base Acrylic ablative Sealant : UL 1479 Classified, Used as joint expansion sealant, Fire and smoke seal rated up to 3hrs , 10 mm thickness applied, Adheres to concrete, stone,plasters, metal,, glass and plastic.
Firestop elastomeric Paste : UL 1479/ FM 4990 Classified, A kind of intumescent putty, Up to 3 hrs rated for sealing gaps of plastic pipes, metal pipe, cable.
Packing : 310 ML Tube/ 25 tube per box.
In tumescent Expandable brick : UL 1479 Classified, 150 mm forms 2 hrs rating, Fiction fitted, Sealant can be used at joint gaps, Expands up to 10 times in presence of fire.
Size : 5x 13 x20 CM, 26 PC/ BOX,40 Box/ Palet.
UL 1479 and FM Classified, Fire rating 3 hrs, Al so available in form of in-tumescent strips and its casing, (stainless steel hoof). Suitable up to 12′ pipe, Expands 20 times in presence of fire.
Available in thickness of 5 mm, width of 60 mm 80 mm and 120 mm, length 2 meter
Automated fire and smoke resistant drop curtain which can be wired into existing fire alarms systems. Made of impregnated silicon, complete with a control panel which can either be wired into an existing fire alarm system or smoke detector circuit or operate independently with a heat or smoke detector. Designed to close automatically in the event of a fire, sealing off the area. The frame is powder-coated white as standard, but it can be coloured if required.
Besides working as smoke barrier, it works as a fire barrier of 80 minutes.
A reinforced glass cloth intumescent pillow filled with fireproof sponge and intumescent material which expands to 3 times its original size in a fire, fire stopping gaps around services in walls, floors or ceilings.Pillows will expand at low pressure, locking together to seal off fire without pushing services out of alignment.
The pillows can be folded to fit between pipes and services. For vertical openings i.e. in walls, build the pillows in rows and staggered in formation, compressing each pillow to ensure all gaps are filled to stop the passage of smoke. For horizontal openings i.e. floors, build together as in walls, but where openings are greater than 700mm x 400mm, to prevent sagging, supply additional support by fixing wire mesh into the opening first.
Ideal for awkward gaps as it can be compressed. It is a good temporary or permanent solution, providing up to 2 hours fire resistance